Technical Specifications:
Microphone Input:
- 5 inputs
- Suitable for driving 200-600 W microphones
- Electronically balanced, XLR connectors
- Phantom Voltage ±15V
- Gain 46 dB
- Gain reduction switch for 15 dB on rear panel
- Input referred noise: -124 dBu (200 W source)
- Input impedance > 5 KW
- Individual input selection
Line-level Input:
- 2 inputs
- Gain 6 dB
- Overload level +20 dBu
- Input impedance 1 MW each side, 2 MW differential
- Balanced or Unbalanced signal input on 6.3 mm 3-pole jack socket
- Common mode rejection better than 50 dB below 500 Hz
- Fully protected inputs
Output:
- 2 balanced / unbalanced
- Nominal 0 dBu output
- Overload +18 dBu into High Z unbalanced / balanced at 600 W
- Overload LED on front panel
Controls:
- 7 individual gain controls
- EQ, LF and HF for each input, ±12 dB at 100 Hz and 10 KHz
- Phantom / Gain Boost switches on rear panel
- Output Channel select (A, B or both) with default to remote
- Remote selection all inputs
- Remote control polar sensitive switches
Frequency Response:
- 20Hz to 20KHz ±0.5dB
Power Requirements:
- ±15 Volt
- Connector: 3-pin Power Mini-Din
- Units can be powered from PS3 Power Supply or AMPETRONIC Loop amplifiers or other regulated suppy
Mounting:
- Wall mounted using WML1U
- Rackmounts on RM-1U rack with optional blanking plate
Dimensions:
- Width: 215 mm / 8.5 in
- Depth: 200 mm / 7.8 in
- Height: 44 mm / 1.7 in
- 1/2 rack width
Weight:
- 1.3 Kg (2.9 Lb.)
Accessories Supplied:
- Power lead
- Connector for remote control
The AMPETRONIC MP522 Microphone Preamplifier has a 5 year warranty.
Copyright © 1999 AssistiveAudio. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.